TCC Kitchen Center Installation Manual - page 3
1
12
Care and Maintenance
Your Kitchen Center Power Base and appliances are designed for ease of use
and minimal maintenance and should provide you with years of trouble free use
with the following easy care.
Maintenance
The Power Base is a self contained unit; no oil is required. Keep all liquids away
from the center shaft and clean the well if food should accidentally spill into it.
Cleaning
The Power Base keypad should be wiped clean with a soft damp cloth. Do not
spray cleaning fluids directly onto the power base and do not allow fluids to
puddle on the key pad or leak into the drive mechanism.
CAUTION:
Do not use harsh abrasive cleaners anywhere on the Power Base. They will
destroy the finish and damage the keypad.
Cleaning the appliances
Do not use scouring pads or harsh abrasives on any of your Kitchen Center
appliances. When you have finished using each appliance, turn off the Power
Base and remove the appliance from the Power Base.
Separate the parts of each appliance. The non moving parts, e.g. bowls and jars,
can be placed in the dishwasher. The bases, containing the gear mechanism,
and the blades should be gently hand washed in a mild detergent solution and
warm water. Be careful when washing and drying the blades, they are extremely
sharp!
Make sure the appliances are completely dry before storing.
Contents
Introduction ....................................................................................... 2
IMPORTANT SAFEGUARDS ...................................................................2
Contact Information ..................................................................................2
Unpacking and Setup ....................................................................... 3
Items you should receive .........................................................................3
Tools and supplies required for installation ..............................................3
Installation ......................................................................................... 4
Positioning the template ...........................................................................4
Making the cut ..........................................................................................5
Mounting the Power Base ........................................................................6
Replace the Top Plate and Keypad ..........................................................6
Installation above a drawer ......................................................................7
Instalation inside a drawer .......................................................................7
Using your Kitchen Center .............................................................. 8
The Keypad ..............................................................................................8
ON/OFF .............................................................................................8
Pulse .................................................................................................8
Speed Keys .......................................................................................8
Timer .................................................................................................8
Power LED ........................................................................................8
Attachments .............................................................................................9
The Blender ......................................................................................9
The Mixer ........................................................................................10
The Mini Chopper ...........................................................................11
Care and Maintenance ................................................................... 12
Maintenance ...........................................................................................12
Cleaning .................................................................................................12
Cleaning the Power Base ...............................................................12
Cleaning Attachments .....................................................................12
Specifications ................................................................................. 13
Power Base ............................................................................................13
Blender ...................................................................................................13
Mini Chopper ..........................................................................................13
Mixer .......................................................................................................13
CAUTION:
Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Return
appliance to the nearest authorized service facility for examination, repair
or electrical or mechanical adjustment. Any other servicing should be
performed by an authorized service representative