TCC Kitchen Center Installation Manual - page 5
3
10
Unpacking and Setup
Items you should receive
When you receive your Kitchen Center, unpack it and check that the items shown
below are included.
Tools and supplies required for installation
•
Kitchen Center Power Base
•
Template
•
Installation instructions
•
Suitable cutting tool
•
Carpenters pencil
Power Base
Template
Owner’s Manual
The Mixer
The Mixer with stainless steel bowl comes
with a whisk, a dough hook and a choice of
beaters.
To attach the mixer:
1. Insert the mixer base into the power base
and turn clockwise to lock.
2. Seat the bowl securely onto the mixer
base.
3. To attach the beater, push it into the
mixing arm until it clicks.
4. Insert the post of the mixing arm into
the mixer base through the center of the
bowl assembly. Make sure it engages
positively with the mixer base.
Begin mixing at lower speeds and adjust
gradually to suit your needs.
Depress the button on the mixer head to
remove the beaters or other attachments.
Remove the beaters from the mixer before
washing. To clean, place the bowl and the
beaters into the dishwasher. Wash the power
shaft and the mixing arm by hand. Make
sure to dry all items thoroughly before use or
storage.
½
The Mixer attachment has been approved for indoor
Base outside.
use only. Do not operate the Mixer with the Power