TCC Kitchen Center Installation Manual - page 7
8
5
Using your Kitchen Center
The keypad
ON/OFF
The On/Off button powers the Base. For safety, activation of an appliance
requires the power button pressed first and then second key be pressed, the power
button alone will not activate the appliance.
Pulse
The Pulse key is active only when pressed and allows you to apply a short burst
of power, for instance when crushing ice or chopping.
Speed Keys
The Speed Keys incrementally increase the speed of an appliance to suit your
particular recipe or process.
Timer
The Timer and digital readout allow you to set a duration of up to 3 minutes. If
no time is set the motor will shut off automatically after 2 minutes of continuous
operation.
Power LED
A red LED next to the ON/OFF button on the keypad indicates power is being
supplied to the unit.
Making the cut
Drill a pilot hole if necessary then, using a suitable cutting tool, cut along the
inside edge of the template line. Your choice of tool should be dictated by the
material of your counter top.
Make sure that the outside edge of the cutting tool follows the inside edge
of the cut line at all times. It is very important that you do not exceed the
dimensions of the template.
At least 8" beneath the
bottom of the counter
For Evaluati