TDK Velocd Manual - Installing The
To install the high speed USB driver:
1. Insert the TDK CD Blender Software Suite disc into your existing CD-ROM drive.
2. Connect the included USB 2.0 cable to your external drive and to a USB 2.0 port on
your PC, then power the drive ON.
• The “Add New Hardware Wizard” dialog box will appear.
3. Click NEXT.
4. Select "Search for the best driver …" and click NEXT.
5. Select only the “Specify a location” checkbox.
6. Click the BROWSE button.
• The BROWSE FOR FOLDER window will open.
7. Click on the plus (“+”) sign next to TDK_SUITE.
8. Click the plus (“+”) sign next to BONUS UTILITIES.
9. Click once to highlight the HIGH-SPEED USB DRIVER folder, then click on OK.
10. Click NEXT.
11. Follow the rest of prompts until setup is complete.
12. After setup is complete, re-boot the computer.
Your new veloCD drive is supplied with all the software you need to complete a vari-
ety of projects. Instructions on using the included software are supplied on the CD
Blender Software Suite disc (included with your veloCD). See the Digital MixMaster
User’s Guide (PDF format), the Digital MixMaster video (WMV format) and the Quick
Start Guide (PDF format). These support materials can also be downloaded from
www.tdk.com/support.
INSTALLING THE
HI SPEED DRIVER
(WINDOWS 98SE AND WINDOWS ME)
USING VELOCD
NOTE: The high speed USB driver is
not required for Windows 2000 & XP instal-
lation.
NOTE: You cannot use your new
veloCD drive to install the high speed USB
driver. Use your existing CD-ROM drive to
install the high speed USB driver.
NOTE: During the high-speed USB
driver installation process, you may be
asked to insert the Windows installation
disc.
TDK.l25.03/52x USB veloCD 3/5/03 2:17 PM Page 6