VAG-Navisystems NaviTouch Installation manual - page 18
2.8. Linking up the GPS Box and the multimedia interface:
To connect the interface GPS Box to the multimedia interface, you must connect the “Touch cable” (4-
wire) connector - (TOUCH OUT cable *1ea), to the “TOUCH” connection port of the multimedia interface,
now we are going to connect the remaining connector to the GPS Box connector (TOUCH SCREEN cable).
18
Once you have done all connections correctly, you
can connect all the power cables of the different
component and devices that will be used
(always
with the vehicle stopped, and with the ignition key
out of its port)
, then, connect again the connectors
that you had removed from the radio, and place
the radio on its original position, start the vehicle to
check if radio works properly. Then we are going to
proceed to configure the system for its tune up.
GPS Box Technical specifications:
Navigation Maps
SD card (supports SDHC, max.16GB)
Operative system
WINCE 6.0 CORE
Audio formats
mp3, pcm, wma
Video formats
mp4, mpeg, mpg, asf, wmv, mov, avi, 3gp, 3g2, wm, divx, mkv, ogm, wvx, mpv
USB
16GB