Valor ITS-703W Owner's Manual - page 11
Tuner TFT display
Tuner Operation
1. Current Source information, touch this area to return to MAIN menu
2. Current Radio Band Indicator
3. Current Preset Station playing Indicator
4. Stereo Broadcasting Indicator
5. Radio Frequency Indicator
6. Preset Radio Stations: Touch to recall preset stations or touch and hold to store a
Station.(Total 12 stations per Band you can preset.)
7. System EQ setting
8. Loud Setting Indicator (7-8 items’ setting method, see “Audio control menu” for
instructions.)
9.Volume Indicator.
10.Local/DX tuning Mode:shows when Local or distance tuning is on
11.Current time Indicator
12.Bluetooth Indicator
13.
: Touch to change among the following bands: FM-1, FM-2, FM-3, AM.
14.
: Touch to automatically scan and store stations in current radio band. You also can
Press the AS/PS button on the front panel.
15.
: Touch to seek down.
16.
: Touch to seek up.
17.
: Touch to tune down one step.
18.
: Touch to tune up one step.
19.
: Touch to activate/deactivate Scan Mode
Switch to Radio Tuner source
Press the MODE button on the front panel or SRC button on the remote control to switch to the
Tuner source.
Select FM/AM Band
Touch the BAND button on the screen, or press the BAND button ( ) on the remote
Control to change among the following bands: FM-1, FM-2, FM-3, AM.
1
2
4
5
6
7
8
9
10
11
13
14
15
16
17
18
19
16
Standby
1. Touch the
button on the touch-screen to access Standby mode.
2. In the standby mode, the unit stands in low-power state with audio output only.
3. In the standby mode, you can return to normal screen mode by performing any unit operation
Except rotate "vol" button on the front panel.
15
The menus are displayed in English only.
The output of Camera Image is in normal mode
The video output is switched automatically based
on the current disc.
The video output is in the standard NTSC format
The video output is in the standard PAL format
The TFT panel automatically opens when the unit
is turned on.
The TFT panel will remain in position until the user
opens or closes the screen.
You must press the
button on the TFT panel or
the
button on the remote to open the TFT.
Manual
The output of Camera Image is in reverse mode
3
12