Valor ITS-703W Owner's Manual - page 12
NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless
the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT
screen displays caution information with a blue background. Rear video screens, if applicable,
will operate normally.
Opening/Closing the TFT Video Screen
Opening the TFT Screen
To open the TFT video screen, press the (
) button on the unit or press the (
) button
on the remote control.
Closing the TFT Screen
Press the (
) button on the unit or press the (
) button on the remote control again to
close the TFT screen.
Insert/Eject Disc
Inserting a Disc
When inserting a DVD disc, DVD mode is entered and disc play begins.
NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit
code must be entered and/or the disc must be authorized (see “RATING (Parental Lock) Menu”).
You cannot insert a disc if there is already a disc in the unit or if the power is off.
NOTE: CD-R/RW, DVD-R/RW, DVD+R/RWs will not play unless the recording session is closed.
Ejecting a Disc
Press the button
on the unit to eject the disc. The unit automatically reverts to Tuner mode
at the same time.
Reset the Loading Mechanism
If the disc loads abnormally or does not play properly, press and hold the button
on the
unit to reset the loading mechanism. The disc is ejected and normal operation resumes.
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted, press the MODE button on the front
panel or SRC button on the remote control till DVD appears at the top of the screen.
Using the Touch-Screen Controls
DVD Player Operation
1
2
3
4
5
6
7
8
9
18
Auto Tuning
Press the button ( ) on remote control or touch the button on the screen to seek the next
available channel by increasing the tuning frequency. Press the button again to stop searching.
Press the button ( ) on the remote control or touch the button on the screen to seek the
next available channel by decreasing the tuning frequency. Press the button again to stop
searching.
Manual Tuning
Touch the or to increase or decrease the tuning frequency one step.
Using Preset Stations
12 numbered preset buttons store and recall stations for each band. First 6 stored stations (P1-
P6) for the current band appear on the screen, touch the channel directly to select.
You can touch the arrow buttons on the screen to see the other 6 preset stations.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch and hold an onscreen preset button (6) for three seconds. The preset number appears
at the top of the screen.
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button (6) to select the corresponding stored station.
Auto Store (AS)
Press the AS/PS button on the panel or press and hold the button on the screen to
automatic scan and store strong radio stations in the 12 preset channels in the current band.
Program Scan (PS)
1. Press and hold the AS/PS button on the panel or press the button on the screen to
automatic scan the stations in the 12 preset channels in the current band.
2. Touch the button on the screen to automatic scan all stations in current band to preview
stations.
3. Press any button to stop scan to listen to the selected station.
Local Radio Stations Seeking (LOC)
L
ocal tuning lets you tune in radio stations with sufficiently strong signals for good reception. In
areas that reception is poor,you can switch from local to DX by touching the LOC button on the
Screen.
17