Valor ITS-703W Owner's Manual - page 9
System Setup Menu
MAIN Menu
There are three methods to access the MAIN menu.
•Press the SMART DIAL button on the front panel .
•Press the MENU button on the remote control.
•Touch the A area on the touch-screen.
1. Touch to access Front-Zone menu.
2. Touch to access DVD setup.
3. Touch to access General setup.
4. Touch to access Screen setup.
5. Touch to turn to the previous menu.
6. Touch to access Tuner mode
7. Touch to access iPod mode
8. Touch to access DVD mode.
9.Touch to access AV IN mode.
10.Touch to access the Standby mode
11.Touch to access Camera mode.
12.Touch to access SAT mode.
13.Touch to access Bluetooth mode.
Note: Remote, Smart dial, touch screen operations and buttons on front panel are all useable to
select menu and adjust “SETTING”. The following instructions will show the different ways to
Access menus and adjustments.
Screen Setting
Accessing the Screen Setup Menu
•Press the SMART DIAL on the front panel or press the (MENU) button on the remote control to
access MAIN menu.
•Select the SCREEN SETUP button on the bottom of the screen to access the Screen setup.
1
2
3
4
5
6
7
8
9
10
13
12
12
NOTE: The Bass and Treble levels are only adjustable when EQ is set to “User” mode.
The Loudness function compensates for deficiencies in sound ranges at low levels. When the
Loud function is on, LOUD is displayed on the screen.
Exiting the Audio Control Menu
Press and hold the POWER OFF/VOL button on the front panel to exit the audio control menu, or
Press the escape arrow on the top right corner of the TFT display.
Press the (ESC) button on the remote control to exit the audio control menu.
System Reset
To correct a system halt or other unusual operation, use the tip of a pen to press the RESET
button located on the front bottom-right corner of the unit. After a system reset, the unit restores
the settings before the last power off.
Mute
The volume will be muted when the following cases occur:
• Automatic: When the “MUTE” wire is connected to a cell phone that will output a mute signal to
the “MUTE” wire.
• Manual: Press the MUTE button on the front panel or the MUTE button on the remote to mute
The volume from the unit.
NOTE: Press the MUTE button again to restore the volume.
Adjusting the volume or using any of the audio set-up features will cancel the mute function.
User
Flat
Jazz
Pop
Classical
Rock
News
Urban
Rave
Movie
Techno
BASS
TREBL
FADE
BAL
SUB
LOUD
OFF and ON
11
11