Vanner SRC12-1200L Owner's Manual - Owner'S Manual - D913482
Owner's Manual - D913482
SRC12-1200L/S INVERTER/CHARGER
10/31/08 - 10:20 AM
11
I N C O R P O R A T E D
1 – ON/OFF/RESET PUSH BUTTON
The ON/OFF Switch is a pushbutton switch used to turn the inverter function ON/OFF and is
used as a RESET Switch. (Note: The charger function is controlled ON/OFF by the
presence/absence of shore power.) When an automatic shutdown has occurred due to a fault,
one of the fault indicator lights will be displayed until the inverter is RESET. Reset the inverter
by turning the ON/OFF Switch OFF or by turning a remote switch OFF.
Inverter Indicator Lights
2 – INVERTER INDICATOR LIGHT
Light Display
Description
No light
Inverter is OFF.
Solid Green
Inverter is ON and is producing AC power.
Blinking Green
Two blinks per second. Inverter is in Load Demand Mode.
Blinking Green
One blink per second. Inverter switch is ON. Shore power is present.
3 – BATTERY LOW INDICATOR LIGHT
Light Display
Description
Red Light is ON
The inverter is ON but battery voltage has decreased less than 11 volts
DC. Automatic inverter shutdown for low battery at 10.5 volts is
imminent unless the battery voltage is increased.
Blinking Red Light
The inverter has shut itself OFF due to a low battery voltage caused by
voltage to the inverter dropping below 10.5 volts. The Inverter ON/OFF
Switch must be cycled to reset and restart the inverter.
4 – OVER TEMPERATURE INDICATOR LIGHT
Light Display
Description
Red Light is ON
The inverter has shut itself OFF due to excessive heating or load.
Check for blocked vents or any type of air obstruction to the inverter
and/or remove load. The Inverter will automatically restart when the
inverter cools down.
5 – OVERLOAD INDICATOR LIGHT
Light Display
Description
Blinking Red
The inverter has shut itself OFF due to overload. The Inverter ON/OFF
Switch must be cycled to reset and restart the inverter.