Vanner SRC12-1200L Owner's Manual - Owner'S Manual - D913482
Owner's Manual - D913482
SRC12-1200L/S INVERTER/CHARGER
10/31/08 - 10:20 AM
7
I N C O R P O R A T E D
1 to the OFF position can turn OFF the Load Demand Feature. This will cause the inverter to remain fully
ON; producing 120 Volts AC whenever the inverter switch is ON regardless of AC load.
4.3
AUTOMATIC TRANSFER SWITCH:
The Automatic Transfer Switch automatically allows input power from an external AC power source, such
as shore power or a generator, to pass through the inverter output circuit for use by inverter loads.
5 PARTS AND ACCESSORIES
Vanner Part Numbers
Part Number
Name
Description
SR10
Silent Runner Series Remote Remote Display with On/Off Switch
011486
SR10 Remote Cable
10 foot Cable for SR10 Remote
D011664
200 Amp Cube Fuse Kit
Cube Fuse, Nut and Mounting Bar Stud
011756
200 Amp Cube Fuse
Bussmann FS-HVBF-200 Cube Fuse
04522
200 Amp ANL Fuse
Bussmann ANL-200 fuse
03637
ANL Fuse Holder
Fuse holder for ANN and ANL fuses
IFM1
Interface Module
Interface to allow remote control of inverter via customer
supplied ON/OFF switch(s), and to accept remote display
panels for inverter and charger.
D06638
Remote Inverter Panel
Inverter Display Panel (Requires IFM1)
D06639
Remote Charger Panel
Charger Display Panel (Requires IFM1)
D06781
Remote ON/OFF Rocker
Switch
ON/OFF Rocker Switch w/ 8' cable (Requires IFM1)
International Truck and Engine Corporation® part numbers
Part Number
Description
3664124C91
Positive Battery Cable harness
3664125C91
Negative Battery Cable harness
3664126C91
Ground Cable
6 SAFETY INSTRUCTIONS
6.1 READ ME
This manual contains important safety and operating instructions for the Vanner Incorporated Silent
Runner Series Power Inverter/Charger System. The SR-Series Inverter/Charger is designed to be
compliant with UL458, Power Converters/Inverters and Power Converter/Inverter Systems for Land
Vehicles.
6.2 SAVE THESE INSTRUCTIONS
WARNING
This equipment employs components that tend to produce arcs and sparks. To prevent fire
or explosion, DO NOT install in confined areas or compartments that contain batteries or
flammable materials.
WARNING
Risk of electrical shock. Use only the circuit breaker(s) specified in the installation and
operating instructions supplied with this inverter. Other types may fail to operate properly
when connected to this equipment.
CAUTION
Read Owners Manual BEFORE wiring or powering up.