Varian 947 Instruction Manual - Draf
DRAF
T 2/4/02
Service Pendant Hand-Held Terminal
6
Example 3 – Check and Set the Auto Sequence Parameters
The Auto Sequence rough time and test time intervals can be set and the Auto Sequence
option turned on using the pendant.
1. Display the currently set rough time and test time.
❑
Press:
The pendant displays the current rough time interval and ends the string with ok.
❑
Press:
The pendant displays the current test time interval and ends the string with ok.
2. Set the rough time interval to 12 seconds.
❑
Press the following keys in order from left to right to enter the value:
3. Set the test time interval to 5 seconds.
❑
Press the following keys in order from left to right to enter the value:
4. Verify the values by repeating steps 1 and 2.
5. Set Auto Sequence to on.
❑
Press the following keys in order from left to right:
SET
RUF TM
SHOW
SET
TST TM
SHOW
1
2
SHIFT
SET
RUF TM
SHOW
5
SHIFT
SET
TST TM
SHOW
SHIFT
ON
A SEQ
OFF