1. DL manuals
  2. Vax
  3. Vacuum Cleaner
  4. vrs101
  5. Instruction Manual

Vax vrs101 Instruction Manual

Manual is about: Cadence Series

Summary of vrs101

  • Page 1

    Instruction manual operating and servicing instructions vax cadence series important: read carefully before assembly and use. Please contact our customer care line on: 0330 026 8455 mon-fri 8.30am to 6.30pm, sat 9.00am to 5.00pm please do not return this product to the store. This product is intende...

  • Page 2: General Safety Information

    General safety information this vacuum cleaner is intended for household use only and not for commercial or industrial use. Please keep instructions for further use. When using the vacuum cleaner basic safety precautions should always be observed, including the following: • only use the vacuum clean...

  • Page 3: Caution:

    3 • do not pick up any flammable or combustible materials (lighter fluid, petrol, kerosene etc.) or use in the presence of explosive liquids or vapours. • do not vacuum up harmful or toxic material (chlorine, bleach, ammonia, drain cleaner etc.). • do not vacuum up hard or sharp objects such as glas...

  • Page 4: Contents

    General safety .......................................................................................................... 2-3 contents .................................................................................................................... 4 machine overview ................................

  • Page 5: Machine Overview

    1 2 3 5 4 9 8 9 8 7 6 machine overview vacuun description *accessories not included with your model may be purchased separately by visiting www.Vax.Co.Uk 5 actual model may vary from images shown. 10 11 12 13 14 15 1. Handle grip 2. Stretch hose 3. Dusting brush 4. Dirt bin release button 5. Shroud ...

  • Page 6: 1.3

    1.3 b important hose must be connected as shown for all operations. 1.1 remove all parts from carton and identify each item shown. Make sure all parts are located before disposing of packaging. A. Handle b. Crevice tool (attached to handle) c. Main body d. Dirt bin e. Dusting brush f. Hard floor ada...

  • Page 7: Attach Dirt Bin

    7 actual model may vary from images shown. 1.5 place bottom of dirt bin into vacuum body first. Pivot bin into vacuum. Dirt bin is secure when you hear a click. Attach dirt bin 1.5 store tools 1.6 e d 1.7 1.6 snap dusting brush (d) into storage area on side of cleaner. 1.7 crevice tool is permanentl...

  • Page 8: Handle Release

    8 actual model may vary from images shown. 1.9 pull back handle to tilt back. Press on the front of nozzle if needed. Handle release 1.9 1.10 move the handle and adjust it to the desired position for operating the cleaner, and lowering handle to clean under furniture. Floor/carpet cleaning 1.10 1.12...

  • Page 9: Attach Wand and Tools

    9 actual model may vary from images shown. Attach wand and tools 1.15 remove the hose from hose caddy. Connect tools to end of hose or use hose alone. To use handle wand, first remove hose from hose holder then remove handle from main body by pressing the handle release button. Attach hose to top of...

  • Page 10: 3.1

    3.1 3.1 turn the quick cord release for easy cord removal. Store cord in cord guide to keep out of the way while vacuuming. Wrap cord around cord hooks for convienient storage. Attach the plug end to the cord. Cord release/ storage 3.2 3.2 plug cord into electrical outlet. Turn vacuum on by depressi...

  • Page 11: Dirt Bin

    11 actual model may vary from images shown. 4. Taking care of your machine familiarise yourself with these home maintenance tasks as proper use and care of your cleaner will ensure continued cleaning effectiveness. The system check indicator located at (a), alerts you to possible system performance ...

  • Page 12: Filters

    12 actual model may vary from images shown. Filters post-motor filter: how to clean 4.8 click the button on the base of the vacuum toward the outside edges to unlock the filter cartridge. 4.9 remove the foam filter. 4.10 hold foam filter under running water to wash. Wring excess water out of filter....

  • Page 13: 4.13

    13 4.13 belt and brushbar how to replace 4.13 lay the vacuum flat and flip it to expose the nozzle base. The base should lay flat and face up. Remove the five screws. 4.14 pull and lift the nozzle guard off. 4.15 lift and remove the brushbar. Dispose of the old belt. 4.16 slide belt onto motorshaft....

  • Page 14: Caution

    5. What to do if it goes wrong if a minor problem occurs, it usually can be solved quite easily when the cause is found by using the checklist below. Any other servicing should be done by an authorised service representative. Caution ! ! Problem possible cause possible solution cleaner won’t run pow...

  • Page 15: Machine Overview

    Uk service & help any queries or concerns about using your vax, simply visit; vax.Co.Uk/support – vaxireland.Ie or call the vax careline. Calls are charged at the uk local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling. Vax careline: (uk) 0330 026...

  • Page 16: Free 2 Year Guarantee

    Free 2 year guarantee instead of taking me back to the shop, simply visit: vax.Co.Uk/support or call (uk) 0330 026 8455 (roi) 1-800 928 308 let us know what you think @vaxuk we’re here if you need us uk based customer care centre — open 6 days a week monday-friday 8:30am-6:30pm saturday 9:00am-5:00p...