Vax vrs101 Instruction Manual - Caution
5. WHAT TO DO IF IT GOES WRONG
If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the
checklist below.
Any other servicing should be done by an authorised service representative.
CAUTION
!
!
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Cleaner won’t run Power cord not firmly plugged
into outlet.
Plug unit in firmly.
Blown fuse or tripped breaker. Check fuse or breaker in home. Replace fuse/
reset breaker in home.
Needs service.
Please contact our Customer Care Line on:
0330 026 8455 Mon-Fri 8.30am to 6.30pm,
Sat 9.00am to 5.00pm
Thermal protector activated.
Allow cleaner to cool for 30 minutes (this will
reset the thermal protector).
The Performance
Indicator is red or
the cleaner won’t
pick up or low
suction
Dirt bin not installed
correctly.
Review dirt bin removal & replacement.
Dirt bin full.
Empty dirt bin.
Brushbar worn.
Replace brushbar.
Broken or worn belt.
Replace belt.
Clogged filter.
Remove filter and clean
Nozzle/brushbar clogged.
Check nozzle/brushbar; remove obstruction/clog.
Hose clogged.
Remove hose; remove clog.
Dust escaping
from cleaner
Dirt bin full.
Empty dirt bin.
Dirt bin not installed
correctly.
Review dirt bin removal & replacement.
Hose not installed correctly. Review hose installation.
Filter not installed completely. Review filter removal and replacement.
To reduce the risk of personal injury – Unplug before cleaning or servicing.
14