Vax vrs101 Instruction Manual - Handle Release
8
Actual model may vary from images shown.
1.9 Pull back handle to
tilt back. Press on the
front of nozzle if
needed.
HANDLE RELEASE
1.9
1.10 Move the handle
and adjust it to the
desired position for
operating the cleaner,
and lowering handle to
clean under furniture.
FLOOR/CARPET
CLEANING
1.10
1.12 Use the carry
handle to move the
cleaner from room to
room.
CARRY HANDLE
1.12
1.11 For optimal cleaning
performance on bare floors,
brushbar should be
turned off.
The vacuum is shipped
with the brushbar in the
ON position. To turn
brushbar OFF for Suction
Only Mode, step on pedal (A).
1.11
SUCTION ONLY
MODE
A
A
1.13 When using cleaning tools, vacuum handle
should be in the upright position to activate the
automatic “brushbar OFF” and for convenience in
moving the cleaner from one area to another.
Caution: Turn vacuum OFF before disconnecting
and connecting hose to hose tube (A).
To use hose, lift hose end as shown.
1.13
CLEANING TOOLS
A. Dusting brush may be used for carved furniture,
table tops, books, lamps, lighting fixtures, venetian
blinds, baseboards, shutters, and registers.
B. Crevice tool (located on bottom of handle/wand)
may be used in tight spaces, corners and along
edges in such places as dresser drawers,
upholstered furniture, stairs and baseboards.
C. The handle/wand is used to give extra length to
your hose. Can also be used with dusting brush.
Dusting brush can only be used when inserted into
the crevice tool.
D. TurboTool is designed to help you remove pet
hair from your home easily. Can only be used
with hose.
B
C
A
1.14
SELECT PROPER TOOL
(Tools may vary per model)
CAUTION
!
!
Not to be used for grooming a pet.
IMPORTANT
Pedal (A) is inactive when the cleaner is in
upright position.
D