Vector GL1000 User Manual - page 13
User Manual GL1000/GL1010 – Compact Logger
GL1000/GL1010 – Compact Logger
© Vector Informatik GmbH
Version 2.3
- 11 -
GL1010: SD card
The SD card is already contained in the housing of the
GL1010
and cannot be
removed or replaced.
Note:
Please note that the housing of the
GL1010
must not be opened under any
circumstances, since otherwise the IP65 protection class of the data logger is no
longer guaranteed. The SD/SDHC card may only be replaced by Vector Informatik
GmbH. For more information, please contact the Vector Support.
Data transfer
The logged data can be downloaded from the SD/SDHC card in the
GL1000
/
GL1010
or in an SD/SDHC card reader. In both cases for the download and the conversion
the configuration program is required. It is not possible to access the logged data on
the memory card directly through the
Windows Explorer
because of the logger’s own
file system.
Note:
Laptops with an integrated SD card reader rarely cannot identify SD cards with
a logger specific file system. In this case please use an external USB card reader.
Caution:
A formatted SD/SDHC card has to be empty before inserting it in the
logger! The configured logger will delete all files if a formatted memory card is
not empty!
The logger deletes the
Windows
files and the file system on the memory card on start
of logging mode if they exist. The logger uses its own file system that cannot be seen
in the
Windows Explorer
. It is required to use a configuration program to download a
configuration and upload logging files.
2.2.3 Serial Number
Serial number
The serial number is stored in the logger and is copied to the SD card after download
of the configuration and start in logging mode.
The configuration program reads out the serial number of the logger in the
configuration mode. The serial number is displayed correctly, if an SD card is inserted
and the logger was at least one time in the logging mode with this SD card. If this SD
card is inserted in another logger and the logger is not started in logging mode
afterwards, the serial number of the first logger will be displayed in the configuration
program.