Vector GL1000 User Manual - 3.1 Overview
Installation Configuration Programs
User Manual GL1000/GL1010 – Compact Logger
- 24 -
Version 2.3
© Vector Informatik GmbH
3.1 Overview
Overview
This instruction describes the installation of the software package for the
GL1000
/
GL1010
containing:
>
Vector Logger Configurator
Graphic user interface for easy configuration
>
G.i.N configuration program
User interface to create complex configurations with LTL (Log Task Language)
The programs are included with delivery.
Vector Logger
Configurator
The
Vector Logger Configurator
offers a wide range of features to easily create
configurations for the logger. The
Vector Logger Configurator
also supports the
download of the configuration and the upload of logging data including the export to
different file formats. Additionally the configuration can be saved as LTL code to be
used in the G.i.N. configuration program.
G.i.N. configuration
program
The G.i.N. configuration program can be used as configuration program for high end
configurations. It offers full support of all features available with LTL (Log Task
Language). This program can be used to import LTL code from the
Vector Logger
Configurator
or from existing configurations written in LTL or to write own
configurations in LTL.
3.2 Installation Vector Logger Configurator
Overview
This instruction describes the installation of the
Vector Logger Configurator
2.1 or
higher for the
GL1000
/
GL1010
containing:
>
Vector Logger Configurator
>
Online help for the Logger Configurator
>
User manual for the Logger Configurator
>
This user manual
3.2.1 Requirements
Operating system
The following software requirements must be fulfilled to run the
Vector Logger
Configurator
:
> Windows 7
/
Windows 8.1
(32/64 Bit)
> Windows 10
(64 Bit)
Restriction
Windows 8.1
: AUTOSAR databases are not supported.
3.2.2 Setup
The
Vector Logger Configurator
is installed as follows.
1. Execute the setup, which is found on the installation CD:
.\VLConfig\Setup.exe
2. Please, follow the instructions in the setup program to complete the installation.
3. After successful installation, the
Vector Logger Configurator
can be found in the
start menu (if selected during installation).