Vectron POS MobilePro User Manual - page 20
20
Vectron POS Mobile
Pro
You then see the registration surface
and the POS MobilePro is ready for
operation.
Note
You registration surface may differ completely from
the fi gure above. This depends on the programming of
the POS MobilePro. Please contact your local Vectron
dealer.
For switch off press the
C
key for two seconds or longer. This does
not switch off the POS MobilePro as such but the display and an en-
ergy save mode is enabled. This saves the battery and prolongs the
service life of the POS system.
On next switch on you therefore do not see the start screen but the
registration surface.
For a complete switch off of the Vectron POS MobilePro you must
press the
C
and keys on top right simultaneously for fi ve seconds.
The blue and red LED light up for fi ve seconds.
Then the blue and green LED start to fl ash parallel with approx. 1 Hz.
You can now release the keys. The blue and green LED fi nally fl ash
up once and go out.
The POS MobilePro is completely switched off.