Vectron POS MobilePro User Manual - page 63
63
Vectron POS Mobile
Pro
MobilePro
US
Operating the POS system
8
In this chapter you get an overview on the functions of your Vectron
POS system and an introduction in the basic operational procedures.
Normally, your Vectron dealer has adjusted the POS system accor-
ding to your requirements. Some operations at your POS system may
therefore be completely different to those described in this manual.
In this case ask your Vectron dealer who will explain the functions
particularly installed for you.
Note
The buttons on the touch screen display their func-
tions mainly by small pictographs, so-called icons.
The icons contained in the Vectron POS software and
their meaning are explained in the supplement.
Sign in and -out at the POS system
8.1
Before you can make any entries the clerk has to sign in at the POS
system. This allows you to trace at any moment which clerk is re-
sponsible for which entries. Different clerks can get different autho-
rizations, e.g. void.
There are different ways to sign in and -out at the Vectron POS Mo-
bilePro.
Sign in by transponder card
8.1.1
In case your Vectron POS MobilePro has a built-in transponder rea-
der, you can sign in to the POS system with the transponder card.
Hold the card to the rear of the terminal. The transponder is behind
the dark plastic plate with the product logo.
If the POS system is programmed to require a secret clerk number
you now have to enter this secret number and confi rm with
or .