Vectron POS MobilePro User Manual - page 56
56
Vectron POS Mobile
Pro
Service life of batteries
6.4
The Vectron B30 battery is a high-quality, rechargeable Lithium-Ion-
battery. To reach its maximum capacity they should be discharged
completely three to four times and then charged again.
Symptoms which indicate an exhaustion of the battery capacity:
• The battery must be charged in ever shorter intervals.
• The Vectron POS MobilePro suddenly switches off and can only
be used with a newly charged battery. The error message „Batte-
ry empty“ is no longer displayed.
• The Vectron POS MobilePro does not react to switch on.
Attention!
Important note:
Exhausted or damaged batteries cannot be repaired
but need to be exchanged and disposed of properly!
Tips for a long service life of the batteries:
• If possible use the batteries until the Vectron POS MobilePro fa-
des in the message „Battery empty“ or - when having confi gured
the capacity progress bar - the bar turns red.
• Always charge the discharged batteries completely. This status
is indicated by permanently illuminated control lamps.
• Batteries that are not used for a longer period (approx. 2 - 3
months), should be charged to max. 30 %. For this purpose the
discharged Vectron B30 must be charged for approx. 40 minutes.
Afterwards do not store the battery in the charging station.