Vectron POS MobilePro User Manual - page 66
66
Vectron POS Mobile
Pro
PLUs are to be transferred before pressing
the split with
Guest check move
8.2.5
Rather than splitting single PLUs from one check to another, “Check
Move” allows the entire check to be moved to another guest check.
The clerks must be vested with the according authorization. Proceed
as follows:
1. Open the GC to be moved. If the GC has alredy been opened, clo-
se it with
key or . G.C. moves can only be carried out if the G.C. is opened
anew.
2. Enter the target GC number and press
GC that has been moved is closed automatically.
Shift change
8.2.6
Shift change means that a guest check is transferred to another clerk
(e.g. change of shift). Open the guest check that is to be transferred.
Enter the number of the clerk to whom the guest check is to be trans-
ferred and press
Hold buffers
8.2.7
To open a hold buffer press the respective key. By means of the hold
buffer keys you can switch between the individual hold buffers. To
close a hold buffer press a media key.
Depending on the programming of the POS system a hold buffer is
automatically assigned to a certain clerk. In this case the hold buffer
change is automatically carried out if a new clerk signs in.