Vectron POS MobilePro User Manual - page 42
of
112
42
Vectron POS Mobile
Pro
SIM-card reader
5.3.11
For future applications we equipped the Vectron POS MobilePro with
a SIM-card reader. It serves e.g. for a coding for cashless payment.
The card reader is under the battery compartment lid next to the
current collectors.
Proceed as follows to insert a SIM-card to the reader:
1. Press the
C
key for two seconds or longer until the display of the
POS system switches off.
2. Turn the locking button of the compartment lid by 90 degree to
the left and take off the lid (see above, fi g. 4).
3. Take out the battery.
4. Take the SIM-card so that the chip is at the bottom. The rounded
edge points to the rear.
SIM-card
Fig. 16: Adjusting the SIM-card