Veet Infini’Silk PRO Quick Start Manual - page 10
19
18
En
glish
En
glish
11.1. “my Veet
®
Infini’Silk™ Pro™ does not start.”
Make sure the POWER ADAPTOR is properly connected to the Infini’Silk™ Pro™ device.
Make sure the POWER ADAPTOR is plugged into an electrical outlet on the wall.
11.2. “A light pulse is not emitted when I press the PULSE BUTTON
Make sure that the READY INDICATOR LIGHT is blinking to ensure you have good contact with the skin
and that the TREATMENT SURFACE is evenly and firmly pressed to the skin. For your safety, the PULSE
BUTTON will activate a pulse only if the TREATMENT SURFACE is firmly pressed against the skin.
Check the SKIN TONE WARNING INDICATOR LIGHT. If it blinks, this is an indication that your skin
tone, measured by the SKIN COLOR SENSOR, is too dark for safe application. Try using the device on a
different body part or contact the RB® Consumer Relations
Check the REPLACE CARTRIDGE INDICATOR LIGHT. If it is on, disconnect Veet
®
Infini’Silk™ Pro™ and
replace the LAMP CARTRIDGE.
Make sure that the READY INDICATOR is on.
If within 10 seconds the READY INDICATOR remains off turn Veet
®
Infini’Silk™ Pro™ off and back
on by pressing the ON/STBY SWITCH twice.
If the problem persists, contact the RB Consumer Relations Center at 1-866-252-5327
or visit www.veet.us
Check the SYSTEM WARNING INDICATOR LIGHT.
If the light is on turn Veet
®
Infini’Silk™ Pro™ off and back on by pressing the ON/STBY SWITCH twice.
If the problem persists, contact the RB Consumer Relations Center at 1-866-252-5327 or visit
www.veet.us
If the problem persists, contact the RB Consumer Relations Center at 1-866-252-5327 or visit
www.veet.us
11. Troubleshooting
Do not attempt to open or repair your Veet
®
Infini’Silk™ Pro device.
Opening Veet
®
Infini’Silk™ Pro™ may expose you to dangerous electrical components and to pulsed light
energy, either of which may cause serious bodily damage and/or permanent eye injury.
Trying to open Veet
®
Infini’Silk™ Pro™ may also damage the device and will void your warranty.
Please contact RB Consumer Relations if you have a broken or damaged device in need or repair.
For more information about Veet
®
Infini’Silk™ or Veet products, contact the RB Consumer Relations Center
at 1-866-252-5327 or visit www.veet.us
If your device is broken, damaged, in need of repair, or for any other user assistance, contact the RB Consumer
Relations Center at 1-866-252-5327 or visit www.veet.us.
12. Consumer Relations
Spot Size
1.3cm x 3cm [3.9cm²]
Speed
1 pulse every 3.5 second: 1.1 cm²/sec
Technology
Home Pulsed Light™
Max Energy Level
Max 5J/cm²
Wavelength
475-1200nm
Charging Time/Power Source
Continuous operation
Electrical Requirements
100-240VAC, 0.9A
Operation and Safety
Skin Color Sensor ensures use only on suitable skin complexions.
Package Size
22cm x 22cm x 14cm
System weight
0.35kg
Temperature
Operating
10 to 40°C
Storage
-40 to +70°C
Relative Humidity
Operating
30 to 75%rH
Storage
10 to 90%rH
Atmospheric pressure
Operating
700 to 1060hPa
Storage
500 to 1060hPa
13. Specifications