Veet Infini’Silk PRO Quick Start Manual - page 9
17
16
En
glish
En
glish
9.2. After treating with Veet
®
Infini’Silk™ Pro™
When Veet
®
Infini’Silk™ Pro™ session has been completed turn Veet
®
Infini’Silk™ Pro™ off by pressing
the ON/STBY SWITCH. All the lit indicators will turn off and the STBY INDICATOR LIGHT will turn on
(Be sure to remember the last energy level setting you used, as it will not be restored when turning Veet
®
Infini’Silk™ Pro™ on again.)
Unplug the ADAPTOR cord from the electrical outlet.
After each hair removal session it is recommended that you clean your Veet
®
™ Infini’Silk™ Pro device,
especially the TREATMENT SURFACE (See: “Cleaning Veet
®
Infini’Silk™ Pro™”).
After cleaning, it is recommended to store your Veet
®
Infini’Silk™ Pro™ device in its original box, and
keep it away from water.
Skin care following hair removal session
Do not expose treated areas of skin to the sun. Be sure to carefully protect the treated
skin with sunscreen, throughout the hair removal period and for at least 2 weeks
following the last Veet
®
Infini’Silk™ Pro™ session.
10.1. Cleaning Veet
®
™ Infini’Silk™ Pro
After each hair removal session, it is recommended to clean your Veet
®
Infini’Silk™ Pro™ device, and
especially the TREATMENT SURFACE.
Unplug Veet
®
Infini’Silk™ Pro™ before cleaning.
Use a dry, clean cloth and a specially formulated cleaner for electronic equipment to gently wipe Veet
®
Infini’Silk™ Pro™ surface, and especially the TREATMENT SURFACE.
Never immerse Veet® Infini’Silk™ Pro™ or any of its parts in water!
10.2. Replacing the LAmP CARTRIDGE
The Veet
®
Infini’Silk™ Pro™ LAMP CARTRIDGE can fire a pre-set and limited number of light pulses. Pulse
intensity is determined only according to the energy level setting of the device. There is no decrease of
energy during the usable lifetime of the LAMP CARTRIDGE.
“When only 100 light pulses remain in the LAMP CARTRIDGE, the REPLACE CARTRIDGE INDICATOR
LIGHT on the CONTROL PANEL will start blinking, indicating that the LAMP CARTRIDGE should soon
be replaced.“
“As the number of light pulses in the LAMP CARTRIDGE further decreases, the REPLACE CARTRIDGE
INDICATOR LIGHT blinking will grow faster.“
Once all the pulses in a LAMP CARTRIDGE have been used, the REPLACE CARTRIDGE INDICATOR
LIGHT will remain steadily on, indicating that further pulses cannot be emitted.
In order to continue the hair removal session, it will now be necessary to replace the LAMP CARTRIDGE.
To replace a LAMP CARTRIDGE:
1. Press the ON/STBY SWITCH to turn Veet® Infini’Silk™ Pro™ to STBY mode.
2. Unplug the power adaptor from the electrical outlet.
3. Grasp the used LAMP CARTRIDGE on both sides, pull it out of the socket
4. Unwrap a new LAMP CARTRIDGE.
5. Push the new LAMP CARTRIDGE gently into place.
Note! After replacing the lamp cartridge with a new one, always set the energy to be one level lower than
your normal setting. Raise the energy level back, only if you do not experience abnormal discomfort during
or after the treatment.
10. maintenance of Veet
®
Infini’Silk™ Pro™
Note: A LAMP CARTRIDGE should also be replaced if large spots appear inside it or
if its TREATMENT SURFACE is broken.
9.1. What to Expect when treating with Veet
®
Infini’Silk™ Pro™?
For many people, using Veet
®
Infini’Silk™ Pro™ may be their first experience with a light-based device
designed for home use. Veet
®
Infini’Silk™ Pro™ is simple to use, and hair removal sessions go by quickly.
During a Veet
®
Infini’Silk™ Pro™ session it is normal to experience and feel:
A Fan Noise – The cooling fan in Veet
®
Infini’Silk™ Pro™ makes noise similar to a hairdryer. This is normal.
A Pop Sound with Each Pulse – When a pulse of HPL™ light is activated, it is normal to hear a subtle pop
sound simultaneously with the flash of light.
Moderate Pressure of the Treatment Surface – This is necessary and helpful for placement of adjacent
pulses of light, and is part of the unique safety feature of Veet
®
Infini’Silk™ Pro™.
A Sensation of Warmth and Tingling – During each pulse of light it is normal to feel a mild sensation of
warmth and tingling from the light energy.
Some Mild Red or Pink Color – During and just after your Veet® Infini’Silk™ Pro™ session it is not
uncommon to see some very mild, pink-like color of the skin. This is usually most noticeable around the
hairs themselves.
However if you see full redness of the skin, blistering or burns stop use of Veet
®
Infini’Silk™ Pro™ immediately.