Veet Infini’Silk PRO Quick Start Manual - page 8
15
14
En
glish
En
glish
Veet
®
Infini’Silk™ Pro™ pulses should be administered in rows, starting at one end of each row
and progressing sequentially towards the other end. This technique allows better control of skin
coverage, and helps you avoid treating the same area more than once or overlapping skin areas.
When applied to the skin, the Veet
®
Infini’Silk™ Pro™ TREATMENT SURFACE is designed to
create temporary pressure marks on the treated area. These visible marks can be used for proper
positioning of the next pulse.
Try to avoid overlapping pulses!
14. Repeat the process until the entire treatment area is covered.
Warning: Do not treat the same area of skin more than once per hair removal session!
Treating the same area of skin more than once per session increases the likelihood of
adverse effects.
If your skin blisters or burns, STOP USE IMMEDIATELY!
Energy Level
Energy level determines the intensity of the Veet
®
Infini’Silk™ Pro™ light pulse delivered to your skin,
from the lowest level (-) to the highest level (+). As energy level increases, so does hair removal results
as well as the risk of possible side effects and complications.
Infini’Silk™ Pro offers 5 levels of energy from 1 (the lowest) to 5 (the highest), represented by 3
energy level indicator lights:
Level 1 (lowest) - the left indicator light is steadily lit
Level 2 - the left indicator light is steadily lit and the central indicator light is blinking.
Level 3 - both left and central indicator lights are steadily lit
Level 4 - the left and central indicator lights are steadily lit and the right indicator light is blinking.
Level 5 (highest) - all 3 indicator lights are steadily lit.
Whenever Veet
®
Infini’Silk™ Pro™ is turned on its energy level will automatically be reset to the
lowest energy level. Only one ENERGY LEVEL INDICATOR LIGHT will be on.
To set the energy level, press the ENERGY LEVEL SETTING BUTTONS using “-“ or “+” to
respectively decrease or increase the energy level.
The Skin Color Sensor
Light-based hair removal on darker skin tones can result in adverse effects such as burns, blisters, and
skin color changes (hyper- or hypo-pigmentation).
To prevent such misuse, a SKIN COLOR SENSOR in Veet
®
Infini’Silk™ Pro™ measures the treated
skin complexion at the beginning of each session and occasionally during the session. If the SKIN
COLOR SENSOR detects a skin tone that is too dark for Veet
®
Infini’Silk™ Pro™ application, the
device will automatically stop emitting pulses.
If you see no light pulse and the SKIN TONE WARNING INDICATOR LIGHT blinks, this is an
indication that your skin tone, measured by the SKIN COLOR SENSOR, is too dark for safe application.
Try using the device on a different body part or contact RB Consumer Relations.
Covering skin areas
Veet
®
Infini’Silk™ Pro™ pulses should be administered in rows, starting at one end of each row and
progressing sequentially towards the other end. This technique allows better control of skin coverage,
and helps you avoid treating the same area more than once or overlapping skin areas.
When applied to the skin, the Veet
®
Infini’Silk™ Pro™ TREATMENT SURFACE is designed to create
temporary pressure marks on the treated area. These visible marks can be used for proper positioning
of the next pulse.
Try to avoid overlapping pulses!
Do not treat the same area of skin more than once per hair removal session!
If your skin blisters or burns, STOP USE IMMEDIATELY!