Operating instructions vegaflex 81, 86 shortening set - coax version document id: 50089.
2 contents vegaflex 81, 86 • shortening set - coax version 50089-en-150526 contents 1 about this document 1.1 function ........................................................................................................................... 3 1.2 target group .........................................
3 1 about this document vegaflex 81, 86 • shortening set - coax version 50089-en-150526 1 about this document 1.1 function this operating instructions manual provides all the information you need for mounting, connection and setup as well as important instruc- tionsformaintenanceandfaultrectificatio...
4 2 for your safety vegaflex 81, 86 • shortening set - coax version 50089-en-150526 2 for your safety 2.1 authorised personnel all operations described in this operating instructions manual must be carried out only by trained specialist personnel authorised by the plant operator. During work on and ...
5 3 product description vegaflex 81, 86 • shortening set - coax version 50089-en-150526 3 product description 3.1 configuration the scope of delivery encompasses: • shortening set • documentation – this operating instructions manual 3.2 principle of operation the shortening set is a set of tools and...
6 4 mounting vegaflex 81, 86 • shortening set - coax version 50089-en-150526 4 mounting 4.1 general instructions required tools: the following tools are part of the scope of delivery: • tube cutter for steel tubes • hand deburrer • debur inserts • metal saw • saw guide sleeve for tube ø 21.3 mm (0.8...
7 4 mounting vegaflex 81, 86 • shortening set - coax version 50089-en-150526 3a 6a 6b 3b 5 4 2b 2c 2d 2a 1c 1b 1a fig. 1: shortening set for vegaflex series 80 - scope of delivery 1a retaining rings ø 6 mm (0.24 in), 20 pcs. 1b retaining rings ø 8 mm (0.32 in), 20 pcs. 1c retaining rings ø 16 mm (0....
8 4 mounting vegaflex 81, 86 • shortening set - coax version 50089-en-150526 set 3 vegaflex 86 - tube ø 21.3 mm (0.84 in) • retaining rings, 2 pcs. - order no. 2.30389 • spacer (peek), 1 pce. - ordner no. 2.49950 • saw guide sleeve (3a) for tube ø 21.3 mm (0.84 in) - order no. 2.49938 • mounting too...
9 4 mounting vegaflex 81, 86 • shortening set - coax version 50089-en-150526 7 4 fig. 2: determine suitable position for cutting (on a part of the tube without perforation) 4 tube cutter 7 probe tube 3. Use a vice with tube or prism jaws. Clamp the tube (7) of the probe in the vice. The later cuttin...
10 4 mounting vegaflex 81, 86 • shortening set - coax version 50089-en-150526 8 3 9 7 fig. 3: insert saw guide sleeve 3 saw guide sleeve 7 probe tube 8 electrode rod 9 kerf 6. Take the metal saw (10), insert the saw blade into the slot (9) of thesawguidesleeve(3)andsawofftherod(8)oftheprobe. Towards...
11 4 mounting vegaflex 81, 86 • shortening set - coax version 50089-en-150526 again with the mounting tool (6), slide the retaining ring (1) onto the rod (8) of the probe with a rotational movement. 7 8 1 2 1 6 fig. 5: insert the spacer with the retaining rings 1 retaining ring 2 spacer 6 mounting t...
12 5maintenanceandfaultrectification vegaflex 81, 86 • shortening set - coax version 50089-en-150526 5 maintenanceandfaultrectification 5.1 maintenance if the instrument is used properly, no special maintenance is required in normal operation. 5.2 instrument repair takenoteofthespecificationsinthese...
13 6 dismount vegaflex 81, 86 • shortening set - coax version 50089-en-150526 6 dismount 6.1 dismounting steps note chapter "mounting" and carry out the described steps in reverse order. 6.2 disposal the shortening set consists of materials which can be recycled by specialised recycling companies. M...
14 7 supplement vegaflex 81, 86 • shortening set - coax version 50089-en-150526 7 supplement 7.1 technical data general data materials, wetted parts the shortening set does not alter the durability of the sensor. The materials used are listed in the operating instruc- tions of the sensor. Materials ...
15 notes vegaflex 81, 86 • shortening set - coax version 50089-en-150526.
Printing date: vega grieshaber kg am hohenstein 113 77761 schiltach germany 50089-en-150526 all statements concerning scope of delivery, application, practical use and operat- ing conditions of the sensors and processing systems correspond to the information available at the time of printing. Subjec...
