Vega VEGAFLEX 81 Operating Instructions Manual - 3 Product Description
5
3 Product description
VEGAFLEX 81, 86 • Shortening set - Coax version
50089-EN-150526
3 Product description
3.1 Configuration
The scope of delivery encompasses:
•
Shortening set
•
Documentation
– This operating instructions manual
3.2 Principle of operation
The shortening set is a set of tools and parts which is required to
shorten a VEGAFLEX 81 or 86 in coax version.
The coax version of the sensor consists of a perforated tube with a
rod inside.
3.3 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
based on ISO 4180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE
foil is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out in due consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
•
Relative humidity 20 … 85 %
Scope of delivery
Area of application
Functional principle
Packaging
Transport
Transport inspection
Storage
Storage and transport
temperature