Vega VEGAFLEX 81 Operating Instructions Manual - page 7
7
4 Mounting
VEGAFLEX 81, 86 • Shortening set - Coax version
50089-EN-150526
3a
6a
6b
3b
5
4
2b
2c
2d
2a
1c
1b
1a
Fig. 1: Shortening set for VEGAFLEX series 80 - Scope of delivery
1a Retaining rings ø 6 mm (0.24 in), 20 pcs.
1b Retaining rings ø 8 mm (0.32 in), 20 pcs.
1c Retaining rings ø 16 mm (0.63 in), 8 pcs.
2a Spacer for rod ø 8 mm (0.32 in), plastic PFA, 5 pcs.
for VEGAFLEX 81
2b Spacer for rod ø 16 mm (0.63 in), plastic PFA, 1 pce.
for VEGAFLEX 81
2c Spacer for rod ø 6 mm (0.24 in), PEEK, 5 pcs.
for VEGAFLEX 86 (-20 … +250 °C)
2d Spacer for rod ø 16 mm (0.63 in), ceramic, 1 pce.
for VEGAFLEX 86 (-196 … +280 °C) or (-196 … +450 °C)
3a Saw guide sleeve for coax tube ø 21.3 mm (0.84 in)
3b Saw guide sleeve for coax tube ø 42.2 mm (1.66 in)
4 Tube cutter
5 Hand deburrer with debur inserts
6a Mounting tool for coax tube ø 21.3 mm (0.84 in)
6b Mounting tool for coax tube ø 42.2 mm (1.66 in)
10 Metal saw (not shown)
Select the suitable cable shortening set and the respective tools
depending on the type and tube diameter of the probe.
Set 1
VEGAFLEX 81 - Tube ø 21.3 mm (0.84 in)
•
Retaining rings, 2 pcs. - Order no. 2.33440
•
Spacer, 1 pce. - Ordner no. 2.49945
•
Saw guide sleeve (3a) for tube ø 21.3 mm (0.84 in) - Order no.
2.49938
•
Mounting tool (6a) for tube ø 21.3 mm (0.84 in)
Set 2
VEGAFLEX 81 - Tube ø 42.2 mm (1.66 in)
•
Retaining rings, 2 pcs. - Order no. 2.30822
•
Spacer, 1 pce. - Ordner no. 2.49946
•
Saw guide sleeve (3b) for tube ø 42.2 mm (1.66 in) - Order no.
2.49939
•
Mounting tool (6b) for tube ø 42.2 mm (1.66 in)
Set and selection of tools