Vega VEGAFLEX 81 Quick Setup Manual - page 14
14
5 Set up with the display and adjustment module
VEGAFLEX 81 • Foundation Fieldbus
47589-EN-140324
1
2
Fig.11:Insertionofthedisplayandadjustmentmoduleintothedoublechamber
housing
1 In the electronics compartment
2 Intheconnectioncompartment(withEx-d-iaversionnotpossible)
Note:
Ifyouintendtoretrofittheinstrumentwithadisplayandadjustment
module for continuous measured value indication, a higher cover with
an inspection glass is required.
5.2 Parameter adjustment - Quick setup
To quickly and easily adapt the sensor to the application, select
the menu item "Quick setup" in the start graphic on the display and
adjustment module.
Youcanfind"Extendedadjustment"inthenextsub-chapter.
Application
In this menu item, you can select the application. You can choose
between level measurement and interface measurement. You can
also choose between measurement in a vessel or in a bypass or
standpipe.
Medium - dielectric constant
Inthismenuitem,youcandefinethetypeofmedium(product).
Quick setup
General information
Level measurement