Vega VEGAPULS 67 Product Information - page 17
17
Operation
Radar - Level measurement in bulk solids
29427-EN-160312
4
1
3
2
5
4
Fig. 33: Connection of VEGADIS 81 to the sensor
1 Voltage supply/Signal output sensor
2 Sensor
3 Connection cable sensor - external display and adjustment unit
4 External display and adjustment unit
5 Display and adjustment module
4
5
3
1
2
Fig. 34: Connection of VEGADIS 82 to the sensor
1 Voltage supply/Signal output sensor
2 External display and adjustment unit
3 Display and adjustment module
4 4 … 20 mA/HART signal cable
5 Sensor
Via a PC with PACTware/DTM
The sensor adjustment is carried out via a PC with PACTware/DTM.
4
5
6
3
2
1
Fig. 35: Connection of VEGADIS 82 to the sensor, adjustment via PC with PACT-
ware
1 Voltage supply/Signal output sensor
2 External display and adjustment unit
3 VEGACONNECT
4 4 … 20 mA/HART signal cable
5 Sensor
6 PC with PACTware/DTM
12.4 Adjustment carried out at position remote from
themeasuringpoint-wirelessthroughmobile
network
As an option, the radio module PLICSMOBILE can be mounted into a
plics
®
sensor with double chamber housing. It is used for transmission of
measured values and for remote parameter adjustment of the sensor.
Fig. 36: Transmission of measured values and remote parameter adjustment of the
sensor via mobile phone network.
12.5 Alternative adjustment programs
DD adjustment programs
Device descriptions as Enhanced Device Description (EDD) are available
for DD adjustment programs such as, for example, AMS™ and PDM.
The files can be downloaded at www.vega.com/downloads under "Soft-
ware".
FieldCommunicator375,475
Device descriptions for the instrument are available as EDD for param-
eter adjustment with the Field Communicator 375 or 475.
For the integration of the EDD in the Field Communicator 375 or 475, the
software "Easy Upgrade Utility" is required which is available from the
manufacturer. This software is updated via the Internet and new EDDs
are automatically taken over into the device catalogue of this software
after they are released by the manufacturer. They can then be transferred
to a Field Communicator.