Venus Splash digital User Manual - Glass Lined
9
GLASS LINED
WATER HEATER
1. Temperature Setting:
Temperature can be set from 30
O
C to 75
O
C
Use
“UP”
and
“DN”
key to set the desired Temp.
2. Program (P1): Normal / Smart Mode
To set the
PROGRAM
Press
“Menu”
key and select P1 by using
“UP”
and
“DN”
key. Press Enter key. Display will indicate
“Sd”
for
Normal Mode and
“EC”
for Smart Mode. In Smart Mode Target
Temperature is set to 40ºC automatically & can’t be changed.
3. Program (P2): Actual Power Consumption in kWh.
To know the Power consumed by the Heater (KWH)
press
“Menu”
Key and select P2 by using the
“UP”
and
“DN”
keys and press
“ENTER”
. KWH reading will be
displayed in lower 4 Digits with “KWH” This display will
remain for 15sec only & display will return back to normal
window thereafter.
4. Program (P3): Clock Setting.
To set Clock, press
“Menu”
Key and select P3 by using the
“UP”
and
“DN”
keys and Press ENTER. Hours start blinking along
with CLOCK icon. Use
“Up”
and
“Down”
Keys to set Clock Hours.
Hours Values can be set from 1 to 12. Minutes can be set from
00 to 59. Press ENTER key to save the settings.
5. Program (P4): ON Timer Setting.
To set ON-TIMER, press
“Menu”
Key and select P4
by using the
“UP”
and
“DN”
Keys and press En-
ter. ON-TIMER icon starts Blinking along with
ON-Time Hours. Use
“Up”
and
“Down”
Keys to set Hours.
Press ENTER key to save the settings. ON-TIMER icon stops
blinking. To cancel, ON timer, press Down Key. To set
Timer in daily Mode, press Menu key while ON-TIME icon is
blinking. This will set the ON timer of the heater every day automatically.