Venus Splash digital User Manual - Glass Lined
10
GLASS LINED
WATER HEATER
6. Program (P5): OFF Timer Setting
To set OFF-TIMER, press
“Menu”
Key and select
P5 by using the
“UP”
and
“DN”
Keys and Press En-
ter. OFF-TIMER icon starts blinking along with OFF-
Time hours. Use
“Up”
and
“Down”
Keys to set Hours.
OFF-TIMER icon stops blinking. To cancel, off timer, press
Down Key for 3 sec continuously. To set Timer in daily Mode,
press Menu key while OFF-TIME icon is blinking. This will set
the OFF timer of the heater every day automatically.
7. Program (P6): DISPLAY setting.
This setting is used to configure the display to show
either the clock time or ON/Off time. There will be an
option to display only one out of three parameters
(Clock, On Timer or Off Timer) if both ON Timer & OFF
timers are selected. Press Menu key & use UP/Down
Keys to select P6 & Press ENTER. Clock Time starts blink-
ing, press UP/DOWN key, On Time starts blinking. Simi-
larly OFF time starts blinking as we press Down Key once again. Select any
parameter by pressing ENTER key. Selected parameter will stay on display.
OPERATIONS IN SMART MODE:
Imyst comes with unique smart mode option which has multiple benefits.
• Energy savings of >50% over normal mode
• Quick & Fast heating
• Reduction of scale formation by > 80% - Longer element life
When the heater is set to the smart mode the digital controller resets the tem-
perature to 40
O
C and this cannot be changed.
The normal temperature at which we take a bath /shower is between 38
O
C-40
O
C.
Beyond that there is chance of scaling. By operating in smart mode the heater
heats only till the water temperature reaches 40
O
C instead of 65
O
C-75
O
C. The
time taken to reach SMART Mode setting 40
O
C is much faster. User can take a
bath or shower directly with minimum or no mixing of cold water.
By operating in SMART Mode you can avoid heating to 65
O
C -75
O
C thereby
reducing energy consumption substantially. You can check the actual power
consume by the heater in Normal / Smart mode by Program option P2.