Venus Splash digital User Manual - Glass Lined
of
20
5
GLASS LINED
WATER HEATER
Switch. Connect Red wire to Phase, Black wire to Neutral and Green wire
to earth terminal of the plug. A separate fuse can be provided as an addi-
tional safety feature.
IV. OPERATION
A. Using the heater for the first time :
1.
Do not switch “ON” before filling the heater with water.
2.
Leave the hot water tap open. Now fill the heater by opening the control
valve at the inlet.
3.
When the heater is full, water will start flowing through the hot water tap.
Close the hot water tap.
4.
Now the heater will always have water inside. Water drawn will be replaced
by water from the over head tank.
5.
ALWAYS KEEP THE INLET CONTROL VALVE OPEN.
6.
Now switch “ON” the power supply to the heater.
Fig : 3 Wiring Diagram