Verdant V8-BB-7S Instruction Manual - page 7
- 12 -
- 13 -
USING THE THERMOSTAT
Temperature Control Modes
Changing the Temperature Control Mode
To change the temperature control mode:
Press the Home/Mode
button [
] to switch
between
and
temperature control
modes.
Temperature Control Modes Description
AUTO Temperature Control mode
initiates a custom temperature
control program.
To set up a custom temperature
control program refer to the
Program Settings section.
HOLD Temperature Control mode
maintains the room temperature
at a selected temperature setpoint.
USING THE THERMOSTAT
Temperature Setpoint
Changing the setpoint in AUTO mode will only
change the setpoint until the next event start.
In this situation, “Temporarily Set to” screen
indicator will indicate that the temperature
setpoint will change when the next event
starts.
Changing the Temperature Setpoint
To change the temperature setpoint:
Use the Temperature
Up and Down buttons
[
and
] to raise or
lower the temperature
setpoint.
When adjusting the temperature setpoint,
the setpoint value will temporarily take the
place of the ambient temperature.
AUTO Temperature
Control Mode Indicator
HOLD Temperature
Control Mode Indicator
While adjusting the set-
point, setpoint value will
temporarily take place of
the ambient temperature
“Temporarily Set to”
Indicator