Verdant V8-BB-7S Instruction Manual - page 9
- 16 -
- 17 -
USING THE THERMOSTAT
Program Settings
If you choose to copy the program
settings, settings for all events from the
previously modified day will be copied to
the newly selected day. The thermostat
will automatically prompt you to copy the
settings to the following day.
If you select “No”, repeat steps 1 – 3 to modify
program settings for the selected event.
Repeat the described procedure to program
temperature changes for the whole week.
Copying the Day Settings
If you choose to modify settings for a
different day of the week, the thermostat will
prompt you to copy the previously modified
day settings to the newly selected day.
Press the “YES” button [
] to copy the
program settings.
Press the “NO” button [
] to modify the
program settings for the selected event.
USING THE THERMOSTAT
Energy-Saving Occupancy Detection
Accessing Occupancy Detection Settings
Hold the Home/Mode
button [
] for four
(4) seconds to access
the Energy-Saving
Occupancy Detection
Settings.
Built-in occupancy sensor enables
advanced energy saving features that allow
incrementally adjusting the temperature when
the room is unoccupied, whether you are in
AUTO or HOLD temperature control mode.
You can start saving the energy only minutes
after the room becomes unoccupied as well
as completely eliminate unnecessary energy
consumption if the room remains unoccupied
for longer periods of time.
Short Vacancy Setting
Short Vacancy Setting allows reducing the
temperature setpoint by a selected number
of degrees, if the room is unoccupied for a
selected number of minutes.
Long Vacancy Setting
Long Vacancy Setting allows reducing
the temperature setpoint to a selected
temperature, if the room is unoccupied for a
selected number of hours.