VolantexRC ASW28 Instructions Manual - To B
To b
ind the receiver
1. Move
the throttle
stick
to the bottom.
2.
Turn on the transmitter.
3.
Connect the battery to the receiver.
4.
Press the bind button of the receiver. (the LED of the receiver will flash quickly)
5. When t
he LED
stops
flashing
and stays on
the bind is successful.
Cautions
Pls make sure the throttle joystick is
at
the bottom position
w
hen
you
bind the receiver
and b
efore you connect the battery
in
the
model.
Please
remove
the
propeller
before
binding
the receiver
as the motor might
inadvertently start
and cause injury.
Check The Control Surface and Channel Condition
Before trying to fly the airplane, please carefully check to make sure the
transmitter and the servos work normally.
CAUTION: Make sure that you
turn on the transmitter first and
only
then connect the battery plug. If
you want to turn off the transmitter you must ensure that the battery
in the model is disconnected first.
(Right Throttle)
(Left Throttle)
(Right Throttle)
(Left Throttle)
14