VolantexRC ASW28 Instructions Manual - page 5
of
24
9. Connect the pushrod to the servo
arm
and fix the servo arm to the
rudder
servo
with a
screw
(do not connect the pushrod to the horn at this point)
10. Connect the
aileron pushrods to the servo arms
and fix the servo arm
s
with a
screw
, (do not connect the pushrods to the horns at this point)
8. Connect the pushrod to the
rudder
servo arm.
12. Put the metal
joiners
through
the corresponding hole
of the fuselage and con-
nect the servo wires of the
ailerons and flaps.
5
11. Insert the metal
wing joiners
to the
main wing.