Vollara LAUNDRY PURE User Manual - page 12
12
STATUS INDICATIONS
The LaundryPure monitors its operations with status
indicator lights.
• Blue light indicates normal operation
• Red light indicates a possible issue
• Red light with audible alert indicates a possible leak
If this occurs, please contact Customer Service at
(800) 989-2299.
• Electrical Shock Hazard. Disconnect power before
attempting installation or service.
• Electrical Shock Hazard. When working with electrical
connections, the appliance and surrounding area
should be clean and dry of any standing water. Failure
to follow these instructions can result in death, fire,
or electrical shock.
• Do not operate LaundryPure with the UV shield or
front cover removed or improperly installed. Failure
to follow these instructions can result in severe eye
damage, death, or electrical shock.
WARNING:
CAUTION:
WARNING:
TEMPERATURE CONTROLLING WATER VALVES
Some washers monitor the incoming cold water temperature and adjust too cold of water by
adding hot water, even if the water temperature is set to cold. If you have one of these washers,
do not install with the “Y” adapter. Failure to do so may cause the washer to not operate
correctly. Consult your washing machine owner’s manual if needed.
An optional LaundryPure water tap allows you to run oxygenated water for other uses
such as cleaning surfaces. (ActiveClean Port - 9950107)
EXTERNAL WATER TAP (AVAILABLE SEPARATELY)
Status Indicator Lights