Vollara LAUNDRY PURE User Manual - page 7
7
2
1
HOSE INSTALLATION
Turn the cold water
off by shutting off
the cold water
faucet.
NOTE:
To help prevent water spray when
disconnecting hoses, you can relieve pressure
in the water line by momentarily starting your
washing machine.
NOTE
:
To ease hose installation and prevent cross threading,
connect hose prior to mounting unit on wall.
Remove the cold water
hose from the cold water
inlet on the back of your
washing machine. Leave
hot water hose attached.
When connecting hoses to your LaundryPure hand start the
hose connector(s) Using adjustable pliers finish tightening
hose connector(s). Do not remove or disconnect the hot
water line from your washing machine or water valve.
CAUTION:
1
Return the LaundryPure cover to its original position,
fitting the bottom in place and tipping upward.
2
Secure with two (2) screws (not shown) along the top
edge.
3
Put the two (2) remaining screws along the
bottom edge and tighten.
REINSTALL THE COVER
Screws
Screws
NOTE:
Remove the two black caps from the hose connections
before installing hoses.