Volth S-NET1 Operation manual - Main Functions

       S-NET1 Series are newly developed by our company which are capable of anti current 

interference.  The  equipment  is  composed  of  three  parts:  main  tester  (S-NET1-M),  receiver 

(S-NET1-S) and remote identifier (S-NET1-R). It is a multifunction device, capable of measuring 

cable length, cable tracing, cable continuity testing, PoE and PING functions also it can detect 

voltage presence. Users can read the test results visually from the 3.7 inch color screen. All 

these make this item be as a practical tool for low voltage system installation and maintenance 

technicians of communication circuits and comprehensive wiring circuits.It is widely used in the 

fields like telephone system, computer networks and other metal lead circuits. 

Main functions

• PING Testing.

• Detect PoE presence and how much the voltage is. 

• Port flash function helps locate the target network cable more easily on the Router / switches 

  with electricity.

• Scanning cable on the POE Router.

• Capable to test open, short, cross connection, reverse, and broken wire positioning with M-S, 

  M-R method.

• Measure length of network cable, coaxial cable, telephone cable and USB cable up to 

  2000m, no connection of remote unit.

• To perform crosstalk test on network cable to solve the potential problem of slow speed.        

• To quickly find the targeted cable without stripping isolation among unknown cables.

OK

Power

CHG

NCV

SCAN

S E T

R E C E I V E R

Cable Length Tester 

W

IR

E

M

A

P

C able L ength T es ter 

E MIT T E R

Menu

Mapping

Port Flash

POE

Scan

Length

Ping

S-NET1

S-NET1

S-NET1

Main tester

(S-NET1)

Receiver

(S-NET1-S)

 Remote identifier 

(S-NET1-R)