Volvo 164 Owner's Manual - page 57
SERVICING
1
3
5 6
2
4
Changing a wheel
The spare wheel, jack and tool kit are stored
i n the luggage compartment. When the car
i s to be jacked up, the jack should be on
l evel, firm ground. Avoid creeping under
the car when it is jacked up since there is
risk that the car might topple off the jack,
particularly if the ground is soft.
Removing
1. Unscrew the wheel cap crosshead screw
and remove the wheel cap.
2. Loosen the wheel nuts 1/2-1 turn with
the help of the box spanner and tommy
bar in the tool kit. All the nuts have
right-hand threads
which are loosened
by turning them in an anti-clockwise
direction.
3. Insert the lifting arm of the jack in the
appropriate jack attachment of the wheel
to be changed. Make sure the arm goes
in all the way. Jack up the side of the car
far enough to lift the wheel off the
ground.
4. Unscrew the wheel nuts completely and
li ft off the wheel. Be careful when lifting
off the wheel that the threads of the
studs are not damaged.
Remove the hub cap.
I