W Audio CR-6 User Manual - page 6
Connections (set up)
There are many options available for your individual needs and the diagram below is just one
example for your reference. Make sure all knobs are at “ zero “ and all devices are off. First, connect
all input sources; next, connect the stereo outputs to the power amplifiers and/or audio receivers
such as CD players. Plug your mixer into the AC power supply. Now you are ready to switch
everything on.
Important: Always switch on your audio input sources such as turntables or CD players first, then
your mixer, and finally amplifiers. When turning off, always reverse this operation by turning off am-
plifiers, then your mixer, and then input devices.
Note: Incorrect connection will result in malfunction. Make sure the connection is correct before
operation.
6