W Audio CR-6 User Manual - page 7
Specifications
7
10k input impedance
Line
140mV rms sensitivity ( for 1.4V balanced output )
10K input impedance un-balanced
Mic 1
1.5mV rms sensitivity ( for 1.4V balanced output);
60mV rms max input
10K input impedance
Inputs
Mic2/ Mic3
1.5mV rms sensitivity ( for 1.4V balanced output);
80mV rms max input
Line
9V rms max
Headphone
0.5 Watt into 47 ohm
Outputs
Distortion
Less than 0.01%
Line
> 87dB
Mic1
> 72dB
Mic2/Mic3
> 72dB
S/N ratio (vs. max output )
Phono
> 70dB
Line
20 ~ 22KHz +/- 0.5dB
Mics
20 ~ 20KHz +/-1.5dB
Frequency Response
Phono
+/- 1dB except for controlled attenuation of -3dB
@20Hz to reduce rumble and feedback
Bass +/- 20 dB
Equalizations
( Mic1/Zone A/ Zone B)
Middle +/- 15 dB; Treble +/- 14 dB
Power supply
+/-15VDC
Dimension (W × D × H)
483 (W) x 200 (D) x 44( H) mm
Net weight
2.2 KGS