Waeco CF-110 Instruction Manual - 5.2
11
CoolFreeze
Operation
5.2
Connections
Connection sockets (Fig.
3
, page 4)
Item
Description
1
Connection socket AC voltage supply
2
Fuse holder
3
Connection socket DC voltage supply
4
Emergency switch
6.
Operation
6.1
Before initial use
Note:
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to “Cleaning and maintenance” on page 17)
The handles are enclosed unassembled. If you wish to attach the
handles, proceed as follows:
➤ Make a handle by putting two holders (Fig.
4
1, page 5) and a
handle (Fig.
4
2, page 5) together.
➤ Fasten the holders with the enclosed screws in the holes provided.
Selecting the temperature units – ºC or ºF
You can switch the temperature display between Celsius and Fahrenheit.
This is how to do it:
➤ Switch on the cooler.
➤ Press the “SET” button (Fig.
2
4, page 4) twice.
➤ Use the “UP +” (Fig.
2
6, page 4) and “DOWN -” (Fig.
2
7,
page 4) buttons to select Celsius or Fahrenheit.
✔ The selected temperature units then appear in the display for a few
seconds. The display flashes several times before it returns to the
current temperature.
Turning the lid around
You can turn the lid around if you want to open the lid from the other
side. To do this, proceed as follows:
➤ Undo the screws on the lock lugs (Fig.
5
1, page 5) and remove
them.
➤ Undo the screws on the hinges (fig.
5
2, page 5) and remove them.
➤ Lay the lid down.
➤ Fit the hinges on the side you want.
➤ Fit the lock lugs on the side you want.
CF80-110_M_70501 23/5/07 10:49 AM Page 11