Waeco CF-110 Instruction Manual - Cleaning and Maintenance
17
CoolFreeze
Operation
6.10 Replacing the device fuse
Caution – Danger of electrocution!
Disconnect the connection cable before you replace the device fuse.
➤ Pull off the connection cable.
6.11 Replacing the light bulb
➤ Press the switch pin (Fig.
8
2, page 6) downwards so that the
transparent part (Fig.
8
1, page 6) of the lamp can be removed at
the front.
➤ Replace the light bulb ensuring that:
i)
the LED’s inside the bulb face toward the transparent cover.
ii)
the polarity is correct. Test for operation and if the new bulb does
not work fit it the other way around.
➤ Press the lamp back into the housing.
7.
Cleaning and maintenance
Caution – danger of electrocution!
Always pull out the mains plug on the power supply before you clean
and service the device.
Caution – Danger of damaging the device!
Never clean the device under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during cleaning as
these can damage the device.
Never use brushes, scouring pads or hard or pointed tools to remove ice
or to loosen objects which have frozen in place.
➤ Occasionally clean the inside of the device with a damp cloth.
CF80-110_M_70501 23/5/07 10:49 AM Page 17