Waldorf PC8140G Installation And Operation Manual - page 5
Specifications
3
Model Numbers Covered in this Specification
PC[1]8140G
GAS PASTA COOKER (Single Tank - 40 Ltr)
NOTE:
[1]: - Back Options;
-
- Standard Models.
L
- Low Back Models.
General
A commercial heavy duty, gas fired high performance Pasta Cooker designed for pasta cooking
commercial high production output, using LPG (Propane) or Natural Gas. The boiling medium is
contained within a heavy gauge stainless steel tank, heated by one infra red surface burner from
beneath the tank.
This Pasta Cooker features an Over Temperature Safety Cut Out System with Full Flame Failure
Safety Controls.
An open tank design to make cleaning a simple and easy task.
Optional Accessories
This appliance can be fitted with the following optional accessories, (refer to the 'Replacement Parts
List' for details).
Plinth Kit.
Gas Supply Requirements
- Australia New Zealand Only:
- UK Only:
Appliance Classification
Category:
II
2H3P.
Flue Type:
A
1.
NOTE: (
*
)
Measure burner operating pressure at upper test point (Supply Pressure) on gas control valve
located behind control panel, this is to be carried out with burner operating at ‘High Flame’
setting. Refer to ‘Gas Conversion and Specification’ Section for further details.
Natural Gas
LP Gas / (Propane)
Input Rating
46 MJ/hr
47 MJ/hr
(N.H.G.C.)
(44,547 Btu/hr)
(44,547 Btu/hr)
Supply Pressure
1.13 - 3.40 kPa
2.75 - 4.50 kPa
(4.5" - 13.5" w.c.)
(11" - 18.0" w.c.)
Burner Operating Pressure
0.92 kPa (*)
2.6 kPa (*)
(3.7” w.c.)
(10.2" w.c.)
Gas Connection
¾” BSP Male
Natural Gas (G20)
Propane (G31)
Nominal
Reduced
Nominal
Reduced
Heat Input (nett)
12.0 kW
5.4 kW
12.5 kW
6.2 kW
Gas Rate
1.27 m
3
/hr
0.42 m
3
/hr
0.97 kg/hr
0.48 kg/hr
Supply Pressure
20 mbar
37 mbar
Burner Operating Pressure
9.5 mbar (*)
Gas Connection
3
/
4
” BSP Male
27.7 mbar (*)