Waldorf PC8140G Installation And Operation Manual - page 9
Installation
7
4.
All air for burner combustion is supplied from beneath appliance. Legs must always be fitted and no
obstructions placed beneath or around base of appliance, as obstructions will cause incorrect
operation and / or failure of appliance.
5. Components
having
adjustments protected (e.g. paint sealed) by manufacturer are only to be
adjusted by an authorised service agent. They are not to be adjusted by the installation person.
NOTE: Do not obstruct or block appliances flue. Never directly connect a ventilation system to
appliance flue outlet.
Clearances
NOTE:
Only non-combustible materials can be used in close proximity to this appliance.
In order to facilitate easy operation, drainage and servicing of appliance, a minimum
of 600mm clearance should be maintained at front of appliance.
Any gas burning appliance requires adequate clearance and ventilation for optimum and trouble-free
operation. The following minimum installation clearances are to be adhered to:
Assembly
This model is delivered completely assembled. Ensure that the adjustable feet are securely attached.
NOTE:
This appliance is fitted with adjustable feet to enable appliance to be positioned
securely and level. This should be carried out on completion of gas connection. Refer
to ‘Gas Connection’ section overleaf.
Optional Accessories (Refer to Replacement Parts List)
Plinth Kit. For installation details, refer to instructions supplied with each kit.
Combustible Surface
Non Combustible Surface
Left / Right hand side
50mm
0mm
Rear
50mm
0mm