Waldorf RN8910G Installation And Operation Manual - page 12
10
Operation
Operation Guide
1.
Waldorf appliances have been designed to provide simplicity of operation and 100% safety
protection.
2.
Improper operation is therefore almost impossible, however bad operation practices can reduce the
life of the appliance and produce a poor quality product. To use this appliance correctly please read
the following sections carefully:-
Lighting the Open Burners (F - Flame Failure Option).
Lighting the Open Burners (PF - Pilot and Flame Failure Option).
Oven Pilot Ignition.
Oven Main Burner / Thermostat.
Turning the Oven to ‘Stand-By’ Mode.
Oven ‘Shut-Down’.
Description of Controls
Piezo Igniter (Oven)
Oven Option
OFF Position
PILOT Burner
Temperature
Graduations 100°C to
290°C
Open Burner Option
OFF Position
HIGH Flame
LOW Flame
Rear Burner
Front Burner
(Indicators are located
above the Gas Control
Knobs).
Fig 3
This appliance is for professional use and is only to be used by qualified
persons.
Only authorised service persons are to carry out installation, servicing or gas
conversion operations.
Components having adjustments protected (e.g. paint sealed) by the
manufacturer should not be adjusted by the user / operator.
Caution