Waldorf RN8910G Installation And Operation Manual - page 17

15 

Cleaning and Maintenance

Open Burner Cleaning 

1.  Remove pot stands, burner caps, burner bowls 

and pot stand supports from top of cooktop.  

Wash with hot soapy water, using a soft  

bristled brush.  Dry thoroughly with a dry cloth.  

Any baked-on deposits can be scraped off  

using a scraper tool. 

NOTE:  Pot stands, burner bowls and pot stand  

supports can be washed in a dish 

washer.  Do Not wash burner caps in 

dishwasher. 

2.  Burner mounting rails should not be removed.  

Clean in situ with hot soapy water. 

3.  Clean burner venturi with a bottle brush and 

hot soapy water, as required. 

4.  Empty spill tray and wash with warm soapy 

water. 

5.  Dry all components thoroughly and  

re-assemble. 

Oven Interior Cleaning 

1.  Do not use wire brushes, steel wool or other 

abrasive materials to clean oven interior. 

2.  Clean oven regularly with a good quality  

domestic oven cleaner. 

3.  Weekly - Remove and clean any built up of 

grease etc. from oven racks and bottom spill 

cover. 

4.  Dry oven thoroughly with a dry cloth and polish 

with a soft dry cloth. 

Stainless Steel Surfaces 

1.  Clean stainless steel surfaces with hot soapy 

water and a soft bristled brush. 

2.  Baked on deposits or discolouration, use a 

good quality stainless steel cleaner or stainless 

steel wool.  Always rub in direction of grain. 

Burner Cap 

Burner Body 

Burner Mounting 

Rail 

Pot Stand  

Support 

Burner Venturi 

Bottle Brush