Waterway NEO 2100 Instruction Manual - Priming Mode
Other manuals for NEO 2100:
Instruction Manual
of
12
MAIN SCREEN:
The main screen displays current time, water temperature, and status
of the system accessories. The screen below from bottom, left to right
indicates LIGHT ON, BLOWER ON, JET 1 at low speed, and JET 2 at
high speed.
PRIMING MODE:
When power is ON, the system will enter a priming mode with priming
screen display on the panel. In this mode, all devices such as JETS,
BLOWERS or LIGHT are operable. JETS can be turned on and off to
prime the pump. System will exit priming mode and go to MAIN dis-
play when RETURN button is pushed, or after 4 minutes of inactivity.
UP
DOWN
MENU
RETURN
LIGHT
JET 1
JET 2
BLOWER
Priming Mode
Press RETURN to exit
JET 1 JET 2 JET 3
JET 5
JET 6
JET 4
12:34 pm
104°F
1 2 3
5 6
4
12:34 pm
104°F
1 2 3
5 6
4
12:34 pm
104°F
1 4
4