Waterway NEO 2100 Instruction Manual - 100°F
MENU NAVIGATING:
•
MENU button: use to enter setting menu and sub-menu screens. For screens with several settable fields
(example: DATE-TIME screen), use MENU button to navigate between different fields within the screen.
•
UP and DOWN button: use to navigate between different options or changing values of a field.
•
RETURN button: use to confirm the setting and goes back to previous screen.
SPA OPERATION:
Turn system accessories ON and OFF by pushing appropriate button on the right side of panel (LIGHT, JET 1,
BLOWER, JET 2…) These accessories have timeout defaults from the manufacturer and will turn OFF automatically
after the time has expired. Timeout time for LIGHT default is 60 minutes; BLOWER default is 15 minutes; JET at
low speed default is 60 minutes; and JET at high speed is 15 minutes. User can change these default times in
“DEVICE TIMEOUT” setting menu.
SETTING TEMPERATURE:
To change water set temperature, use UP and DOWN buttons to set the
desired temperature. The screen will display “SET TEMP” with the
current set temperature. After 5 seconds without any change to the set
temperature, the screen will reverse back to MAIN screen with current
water temperature display. Changing set temperature will make heat
pump turn on to get accurate water temperature to determine if water
needs to be heated up.
Set Temp
100°F
12:34 pm
104°F
1
1
5